I Hope this helps you all out as I could not find this information online, this is from genuine experience, from people 'in the know'. These caps I'm told are generic and do not need to be obtained from Behringer. While waiting for this to be delivered, you need to check the power regulator and the 100Nf capp and the 10Nf caps as these can go faulty and cause the transformer to 'over work', meaning that as soon as you put in the new transformer, it could go again pretty soon. You need the specific one from Behringer. Either yourself or and electronics expert needs to do this.įirst of all, you need to order a NEW transformer. There is a problem with the internal transformer.įrom a lot of talking and searching, I've found out what you need to do. If, like me, you change it and it blows again, change it a second time and it maeks a 'crackling noise internally. I have an and one went down with the same fault after 7 years.įirstly, there is a slow blow fuse in the back above where the kettle lead goes in. If none of these troubleshooting steps work, you may need to contact Behringer customer support for further assistance. In this case, it is best to take the unit to a qualified technician for repair.

Check for other issues: There may be other issues with the unit such as a faulty power supply, overheating or a component failure.

If the fuse has blown, replace it with a new one.

Check the fuse: Check if there is a fuse in the Behringer Powerplay unit and if it has blown.

If the switch is on and the unit is not receiving power, it could be a problem with the switch or internal wiring.

Check the power switch: Make sure that the power switch is turned on and that the unit is receiving power.

Check that the outlet is receiving power and that the cable you are using is not damaged.

Check the power source: Make sure the power source you are using is working properly.

Here are a few troubleshooting steps you can try: There could be several reasons why your Behringer Powerplay unit has switched off and is not powering on again.

Powerplay pro 8